NMD90 cables may be used for both exposed work in dry locations or concealed work in dry or damp locations.
The maximum allowable conductor temperature is 90°C. The minimum recommended installation temperature is -25°C for two-conductor cables and -10°C for three-conductor cables (with suitable handling procedures). Material should be properly stored above 0°C for 24 hours prior to installation.
The maximum voltage rating for all intended applications is 300 volts. Consult the Canadian Electrical Code1 for further information related to applications.
Nonmetallic-Sheathed Cable Certified for Canada Type NMD90
Nonmetallic-Sheathed Cable Certified for Canada Type NMD90
Product Details
Application
Standards:
Type NMD90 cable complies with:
ASTM
CSA C22.2 No. 48 (non-metallic sheathed cable)
Canadian Electrical Code1
ASTM
CSA C22.2 No. 48 (non-metallic sheathed cable)
Canadian Electrical Code1
Technical Data
NMD90 jackets which reduces the coefficient of friction, allowing cables to be installed without external lubricants, resulting in reduced labour and materials costs.
• COPPER CONDUCTORS
• 300 VOLTS / -25ºC MIN, 90ºC MAX
• COPPER CONDUCTORS
• 300 VOLTS / -25ºC MIN, 90ºC MAX
Specifications
ROHS
Low Voltage
Cold Resistant -25℃
Working Temperature 90℃
Flame Retardant
construction
NMD90 cables are available as two- or three-conductor cables with a bare grounding conductor. It is manufactured using annealed (soft) copper conductors-compressed standing for stranded conductors; a heat-resistant thermoplastic polyvinyl chloride (PVC) insulation and nylon jacket for the individual conductors with a PVC jacket for the overall construction.
Conductors are white, black and red (for 3 conductor cables). Cable jackets are colour coded by size for quick identification in the Table below:
JACKET COLOUR CODE - Typical Application Guide
•WHITE - General Residential Wiring
•RED - 2 Black and Red conductors - 208V-240V Circuits (no neutral)
•ORANGE - No. 10 AWG General Residential Wiring
•YELLOW - No. 12 AWG General Residential Wiring
•BLUE - No. 14 AWG - 2 black and white conductors - 120V Arc Fault Circuit Interupter Applications
NMD90 jackets which reduces the coefficient of friction, allowing cables to be installed without external
lubricants, resulting in reduced labour and materials costs.
Conductors are white, black and red (for 3 conductor cables). Cable jackets are colour coded by size for quick identification in the Table below:
JACKET COLOUR CODE - Typical Application Guide
•WHITE - General Residential Wiring
•RED - 2 Black and Red conductors - 208V-240V Circuits (no neutral)
•ORANGE - No. 10 AWG General Residential Wiring
•YELLOW - No. 12 AWG General Residential Wiring
•BLUE - No. 14 AWG - 2 black and white conductors - 120V Arc Fault Circuit Interupter Applications
NMD90 jackets which reduces the coefficient of friction, allowing cables to be installed without external
lubricants, resulting in reduced labour and materials costs.
- DEXIN CABLE
- UL CABLE
- UL 4703 Solar PV Cable
- Hook Up Wire - UL1015
- Teck 90 Cable
- Copper RW90 600V XLPE Insulation Cable
- SOOW Portable Power Cable
- Type THHN/THWN/T90 Wire
- Type AC(BX) Steel Armored Cable
- Nonmetallic-Sheathed Cable Type NM-B
- MC Cable With THHN Ground
- Nonmetallic-Sheathed Cable Certified for Canada Type NMD90
- Metal-clad Cable Certified for Canada Type AC90
- TC Tray Cable FR-XLPE/PVC
- SDW Cable
- Welding Cable 105°C 600V
- DLO Cable or Diesel Locomotive Cable
